MAKROFLEX MF190
Download Firmware ZTE. Download ZTE TOOLS. ZTE Firmware is the official Operating System (OS) of your ZTE Device. The Stock ROM can be used to re-install the Operating System (OS), if in case you are facing any Software related issue, bootloop issue.
Ultrapower assembly adhesive
Characteristics:
- Open time (for positioning parts to be glued together) – 15 minutes
- Does not contain solvents, odorless
- Is suitable for external and internal work
- Initial setting (bonding) power: 45 kg/m2
MAKROFLEX MF190 is used for gluing of any kinds of panels of styropor, plastic and other materials, including those for ceilings and wooden decorative elements. Materials, which can be connected with the help of adhesive include styropor, foamed plastic, polystyrene, wood, metal, PVC, ceramics, wood chip board, gypsum board, cork, gypsum and other similar materials.
Packaging: 400 g cartridge, 250 g tube.
Mf19015
Mf190s
Storage
• Store in cool dry places at a temperature of +5 °С to +30 °С
How to use
Mf190 Modem
Substrate preparation
The surfaces to be glued together must be dry, clean and degreased. At least one of the surfaces must absorb glue.
Application
- Cut off the cartridge point at an angle of 45°
- Apply glue with the help of a pistol evenly and pointwise to one of the surfaces
- Carry out the gluing at a temperature of not below +10°C for 15 minutes while the glue is still moist
- Press the surfaces being glued together hard to each other
- Remove excess glue with a wet cloth
CLEANING
Zte Mf190 Driver
Clean any tools or excess adhesive with water immediately after use. Cured adhesvie can be removed only mechanically.
Mf190s
Storage
• Store in cool dry places at a temperature of +5 °С to +30 °С
How to use
Mf190 Modem
Substrate preparation
The surfaces to be glued together must be dry, clean and degreased. At least one of the surfaces must absorb glue.
Application
- Cut off the cartridge point at an angle of 45°
- Apply glue with the help of a pistol evenly and pointwise to one of the surfaces
- Carry out the gluing at a temperature of not below +10°C for 15 minutes while the glue is still moist
- Press the surfaces being glued together hard to each other
- Remove excess glue with a wet cloth
CLEANING
Zte Mf190 Driver
Clean any tools or excess adhesive with water immediately after use. Cured adhesvie can be removed only mechanically.
LIMITATIONS
Zte Mf190 Unlock
Glue is not suitable for polyethylene, polypropylene, Teflon and similar materials.
